Part Number Hot Search : 
CT100 E000979 MAX1115 MC44818D 74HC13 AAT1142 L3005 M2002
Product Description
Full Text Search
 

To Download 19001-04UL Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  grayhill, inc. ? 561 hillgrove avenue ? lagrange, illinois 60525-5997 ? usa ? phone: 708-354-1040 ? fax: 708-354-2820 ? www.gr ayhill.com rotary switches single deck rotary switches series 19 2" diameter, 15 amp features  ul recognized  rugged construction  choice of termination solder lug terminals ?faston? terminals all dimensions not shown are the same as the solder lug terminals. grayhill part number and date code marked on label. customer part number marked on request. dimensions in inches (and millimeters) 1.687 .030 (42,85 0,76) dia. 3/8-32 unef-2a thread .950 .060 (24,13 1,52 ) .375 .020 (9,53 0,51) .500 .020 (12,7 0,51) bushing keyway .066 .003 wide (1,68 0,08) .036 .005 deep (0,91 0,13) .344 .010 (8,74 0,25) .250 .005 (6,35 0,13) dia. hex mtg nut 9/16 .010 (14,29 0,25) across flats 3/32 .010 (2,38 0,25) thick .88 (22,4) 2.00 (50,8) solder terminals wire hole .125 (3,18) 1.687 .030 (42,85 0,76) dia. .88 (22,4) 2.28 (57,91) dia. for amp .250 series or equivalent wire hole .080" (2,03) .219 .005 (5,56 0,15) specifications electrical rating rated: ul recognition: file number e35289 15 amps, 120 vac, non-inductive load. one amp, 120 vdc, non-inductive load. additional grayhill rating: 7.5 amps, 220 vac, non-inductive load. this rating is based on the following criteria: overload?50 operations at 125% rated ac load and 150% rated dc load. endurance?6000 operations at rated load with 900 vac dielectric strength before and after test. temperature rise?not to exceed 30c when carrying rated ac load after endurance test. contacts will carry 20 amps at 115 volts ac with 30c maximum temperature rise. contact resistance: (measured at 2 vdc and approximately 100 ma) for new switch approximately 10 milliohms. insulation resistance: approximately 100,000 mohms. between mutually insulated parts. voltage breakdown: approximately 2500 vac between mutually insulated parts. materials and finishes rotor contact: silver alloy stator contact: silver alloy shaft: 303 stainless steel stop rivet: steel, tin/zinc-plated mounting bushing: brass, tin/zinc-plated base and drive hub: heat resistant, electrical grade phenolic. mounting nut: brass, tin/zinc-plated or stain- less steel. detent mechanism: brass, silver-plated ?faston? terminal: brass, silver-plated solder terminal: brass, silver-plated mounting hardware: one mounting nut 9 / 16 " across flats, 3 / 32 " thick and one non-turn washer (see detail) are supplied with each switch. additional characteristics single pole, single deck: 2 to 11 positions plus common 30 indexing. contacts: non-shorting type stops: a rivet provides the fixed stop on all switches. minimum number of positions is 2, and maximum is 11. terminal 12, the common, is isolated from rotation. rotational torque: 30 to 75 ounce-inches on a new switch. approximately 22 ounce-inches after 25,000 cycles of operation. contact force: approximately 12 ounces shaft flat orientation: opposite point of con- tact (see circuit diagram). accessories screw terminal adapter spring loaded, plug-in adapters for ?faston? terminals provide excellent mechanical fit and electrical contact. adapter material is brass tin-plated. the terminal adapters are avail- able with a 6-32 thread (-1) or 8-32 thread (-2). a 1/4" panhead screw is provided as part of the adapter. circuit diagram viewed from shaft end with switch in position #1 non-turn washer detail .625 .010 (15,88 0,25) dia. .187 .003 (4,75 0,08) .500 .005 (12,7 1,27) .060 .010 (1,52 0,25) .093 + .015/ ? .000 (2,36 + 0,38/ ? 0,00) .025 .002 (0,64 0,05) part no. sc906-1 .........6-32 thread part no. sc906-2 .........8-32 thread non-turn washer brass, tin/zinc-plated washer, detailed above may be purchased as a separate item. part no. 19c1014. ordering information part numbers: designate as follows, using the 2 digits after the dash to indicate the number of positions. for faston terminal: use 19101-02ul through 19101-11ul for solder terminal: use 19001-02ul through 19001-11ul specials: not available through distributors. for special shafts, bushings, etc. contact grayhill. available from your local grayhill distributor. for prices and discounts, contact a local sales office, an authorized local distributor or grayhill. 12 (common) 3 5 7 8 9 10 2 4 6 1 11 of bu s hing keyway rotary 15


▲Up To Search▲   

 
Price & Availability of 19001-04UL

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X